Tubing Recovery Services
Owen’s Split® Shot Cutter was designed for use where traditional jet cutters were not effective or could not be used. The Split® Shot Cutter is run in a linear configuration adjacent to any collar or connection and positioned by inline magnets. After detonation the collar or connection is split allowing the pipe to be freed for easy removal.
Benefits
- Transportable via air freight at Class 1.4s
- Conforms to API RP-67
- Can be run through heavy mud, paraffin, collapsed tubing and reduced restrictions
- Can be run 4X faster than conventional jet cutters
- Must be run decentralized to maximize effectiveness of tool
TECHNICAL DATA
|
Tool |
1-3/8 IN. |
2 IN. |
||||||
|
Tool diameter |
1-3/8 IN. |
34.9 MM |
1.375 IN. |
34.9 MM |
2.000 IN. |
50.8 MM |
2.000 IN. |
50.8 MM |
|
Housing Material |
Aluminium |
|||||||
|
Explosive Length |
18, 24 in. |
18, 24, 48 in. |
||||||
|
45.7, 70.0 cm |
45.7, 70.0 cm |
45.7, 70.0, 122.0 cm |
||||||
|
Explosive Load |
600 grain/ft |
900 grain/ft |
1200 grain/ft |
2000 grain/ft |
||||
|
Minimum Running Restriction |
1.775 in. |
45.1 mm |
1.775 in. |
45.1 mm |
2.625 in. |
66.7 mm |
2.625 in. |
66.7 mm |
|
Recommended Tubing |
2.375 to 2.875 in |
2.875 to 4.500 in. |
3.500 to 7.000 in. |
5.500 to 16.000 in. |
||||
|
60.3 to 73.0 mm |
73.0 to 114.3 mm |
88.9 to 177.8 mm |
139.7 to 406.4 mm |
|||||
|
Maximum Pressure |
psi |
MPa |
psi |
MPa |
psi |
MPa |
psi |
MPa |
|
Up to 200°F (93°C) |
14,000 |
96.5 |
14,000 |
96.5 |
11,700 |
80.7 |
11,700 |
80.7 |
|
200°F to 325°F |
13,250 |
91.4 |
13,250 |
91.4 |
11,000 |
75.8 |
11,000 |
75.8 |
|
325°F to 400°F |
11,800 |
81.4 |
11,800 |
81.4 |
9,850 |
67.9 |
9,850 |
67.9 |